EN
MarSurf M 300

 


 

 

"A step ahead!"- with MarSurf M 300

NEW: cable-free connection between evaluation unit and drive unit!

The MarSurf M 300 was developed based on the well-proven class of M-units from Mahr.

The Bluetooth interface between evaluation unit and drive unit is unique. 

This means for you: working even more flexibly without cable connection  

A large, illuminated color display to read the parameters and the profiles so that you can:
-read the correct results in a poorly lit atmosphere!

The MarSurf M 300 not only meets the requirements for determination and documentation of selected parameters, but also makes most of the parameters and characteristic curves stipulated in DIN/
ISO/JIS available for the evaluation of the profile assessed.

Moreover, the MarSurf M 300 offers an integrated memory for up to 40,000 results or 30 profiles, as well as the functions of tolerance monitoring, vertical scale selection and the setting of unsymmetric intersection lines for peak count calculation.

 Find out more by watching some application examples
   
Features

 

  • Measuring range of up to 350 μm (.014 in)
  • Units μm/μinch selectable
  • Standards: ISO/ASME/JIS and MOTIF selectable
  • Travsersing length as per DIN EN ISO 4288/ ASME B46.1:
    1.75 mm, 5.6 mm, 17.5 mm (0.07 in, 0.22 in, 0.7 in)
    as per EN ISO 12085: 1 mm, 2 mm, 4 mm, 8 mm, 12 mm, 16 mm
  • Number of sampling lengths selectable from 1 to 5
  • Automatic selection of filter and traversing length conforming to standards
  • Phase-correct profile filter as per DIN EN ISO 11562
  • Cutoff 0,25 mm 0,80 mm 2,50 mm
    (0.010 in 0.032 in 0.100 in)
  • Short cutoff selectable
  • Parameters as per:
    DIN/ISO: Ra, Rq, Rz, Rmax, Rp, Rpk, Rk, Rvk, Rv,
    Mr1, Mr2, A1, A2, Vo, Rt, R3z, RPc, Rmr, RSm, Rsk
    JIS: Ra, Rz, RzJIS, Sm, S, tp
    ASME: Rp, Rpm
    MOTIF: R, Ar, Rx, W, CR, CL, CF
  • Tolerance monitoring in display and measuring record
  • Automatic or adjustable scaling
  • Printing of R-profile (ISO/ASME/JIS), P-profile (MOTIF), material ratio curve,
    measuring record
  • Output of date and/or time of the measurements
  • Integrated memory for the results of up to 40,000 measurements and 30 profiles
  • Dynamic calibration function
  • Locking and/or password protection for instrument settings
 
Application examples

  • On Shafts, large machines
  • Automotive engineering
  • On big workpieces
  • On milling and turning parts
  • On grinding and honing parts
  • In the production area to check the roughness of your workpiece!
 
Scope of delievery

The MarSurf M300 is delivered as a set in a handy carrying case - consisting of:
  • Evaluation unit MarSurf M 300
  • Drive unit MarSurf RD 18
  • Standard probe PHT 6-350
  • Integrated roughness standard (in MarSurf RD)
  • Mahr calibration certificate
  • 1 chart paper roll
  • Height adjustment
  • End face vee-block
  • Probe protection
  • Tracer protection slip-on vee
  • 2 x USB cable (connectable on PC or drive unit)
  • Allen key
  • Power pack with 3 mains plugs
  • Operating instructions
 

 

 

EN
MarSurf M 300, Flyer, English
PDF-File (MarSurf--M 300--3759771--FL--EN--2009-04-15.pdf) Filename
Date 2009-11-05
Description MarSurf M 300 Flyer, English   Version April 2009 
 
© Mahr GmbH - Carl-Mahr-Str.1, D-37073 Göttingen, Germany - Tel. +49 551 7073 800 - eMail - Imprint -