What is more obvious than assessing and documenting
the surface roughness parameters of your work-piece
while checking it for form and position tolerances? Why not assess e.g. the Ra and Rz values with a MarForm
form measuring instrument?If you do so, you can be sure of uncompromisingly high
quality for the pick-up or probe required for the relevant measuring
task is always in optimum measuring position. Profit from: - Reduced testing times and costs due to complete work-piece
assessment in a single set up and in just one run - Higher accuracies due to the automatic selection and position
ning of the probe or pick-up for each measuring task - Simple operation due to a software which is equally well suited
for surface roughness as well as form and position measurements - Detailed and telling measuring records
- Well-proven surface roughness metrology combined with
equally well-proven form metrology
Mahr as the market leader in the field of form metrology offers
form measuring machines of utmost precision and for many
customers Mahr measuring machines are the standard in mechanical
form metrology. And the very well proven stylus method has
been perfected at Mahr. Mahr, the specialist for inductive probes, combines the advantages
of its universal motorized T7W probe with the precision of its PHT
6-350 pick-up. Probe and pick-up grow together. The MarForm
MMQ 200 automatically swivels the probe or pick-up required for
the measuring task to the optimum measuring position!
Combine the monitoring of form and position tolerances with the
assessment of surface roughness parameters. Record and file typical surface roughness parameters such as Ra
and Rz while checking the dimensional stability of your workpieces
on a MarForm MMQ 200 in one go. Don’t bother with
clamping it again on a surface roughness measuring station. Yes, it is possible due to the fully-automatic and program-controlled
change between the form probe with ruby ball and the
PHT 6-350 pick-up with diamond tip. Changing from vertical to
horizontal measuring positions is also fully automatic. Owing to
the rotary axis of the T7W probe which positions any probe arm in
steps of less than 1° with utmost precision, operator interventions
are completely superfluous. | 
close
