 | | MarSurf LD 130 / LD 260. A step forward into new dimensions! Your main advantages: Easy to maintain due to modular design
- High measuring and positioning speed
- Long measuring length, karge measuring stroke
- Groundbreaking oribe system with bionic probe design
- Probe arms with magnetic holder and probe arm recognition
|
| Merkmale |
Properties of the horizontal axis (x)
|
MarSurf LD 130 MarSurf LD 260 |
Tracing length (Lt) 0.1 mm up to 130 mm 0.1 mm up to 260 mm |
Safety contacts for motor-driven
process to switch off the relevant front, back
feed motor |
Positioning speed 0.02 mm/s up to 200 mm/s 0.02 mm/s up to 200 mm/s |
Measuring speed 0.02 mm/s up to 10 mm/s;
recommendation for roughness measurements 0.1 mm/s bis 0.5 mm/s
|
Profile point spacing in X 0.05 µm bis 30 µm, adjustable |
max. numbers of measuring
points per measurement 2.6 million points 5.2 million points |
Resolution in x 0,8 nm |
Uncertainty of the X-axis display ± (0,2+l/1000) µm; l in mm |
Inclination with measuring stand ST 500 CNC (HZ + HB)
or ST 750 CNC (HZ + HB) ±45°; without active adaption of the measuring force |
Properties of the probe system (W) Measuring direction Z+ / Z- |
Pobe measuring range 13 mm (100 mm probe arm)
26 mm (200 mm probe arm) |
| Resolution 0,8 nm |
| Measuring force 0,5 mN bis 30 mN, adjustable via the software |
| |
| Areas of Application |
- In the automotive and automotive supply industry,
e.g. for measuring motors and frame components - In the plastic industry,
e.g. for measuring flanks of plastic gearwheels - In the medical technology,
e.g. for measuring implants - In optics
for measuring asheric lenses
|
| Scope of Delivery |
MarSurf LD 130 with measuring stand ST 500CNC - MarSurf XCR 20:
consisting of:
Midrange LD
Software XCR20
MarSurf LicenseKey - MarWin PC WIN 7 Ultimate 64 bit
- TFT Monitor 19"
- MCP 21 advanced mit Joystick
- Drive unit MarSurf LD 130 Set inclusive. probe system and probe arms
- Probe am LP D 14-10-2/60°
- Probe arm LP D 14-10-500
- Calibration for contour I accuracy class 1
- XY-table CT 200
- Measuring stand MarSurf ST 750CNC with granite 700 x 550 mm
- control modul HZ
- Absorbing elements
MarSurf LD 260 with measuring stand ST 750CNC - MarSurf XCR 20:
consisting of:
Midrange LD
Software XCR20
MarSurf LicenseKey - MarWin PC WIN 7 Ultimate 64 bit
- TFT Monitor 19"
- MCP 21 advanced mit Joystick
- Drive unit MarSurf LD 260 Set inclusive. probe system and probe arms
- Probe am LP D 14-10-2/60°
- Probe arm LP D 14-10-500
- Calibration for contour I accuracy class 1
- XY-table CT 200
- Measuring stand MarSurf ST 750CNC with granite 700 x 550 mm
- control modul HZ
- Absorbing elements
|
close
