Pocket Surf - Mahr Metrology

EN
Pocket Surf
 

Portable Surface Roughness Gage.


 

 

US-patent no. 4.776.212

  
Features

  • Pocket-sized economically priced, completely portable instrument which performs traceable surface roughness measurements on a wide variety of surfaces; can be used confidently in production, on the shop floor and in the laboratory.

  • Solidly built, with a durable cast aluminum housing, to provide years of accurate, reliable surface finish gaging.

  • Can be used to measure any one of four, switch-selectable, parameters: Ra , Rmax/Ry , Rz.

  • Selectable traverse length 1, 3 or 5 cut-offs of 0.8 mm/.030 in.

  • Operates in any position – horizontal, vertical, and upside down

  • Easy-to-read LCD readout presents the measured roughness value, in microinches or micrometers,
    within half a second after the surface is traversed.

  • Out-of-range (high or low) and “battery low“ signals are also displayed.

  • Four switchable probe positions – axial (folded) or at 90°, 180° or 270°

  • Even difficult-to-reach surfaces such as inside and outside diameters are accessible.

  • Integrated data output for SPC-processing units that is compatible with the most common data processing systems.

 
EN
MarSurf Pocket Surf - Flyer
PDF-File (marsurf--pocketsurf--fly--en.pdf) Filename
Date 2008-12-03
Description Pocket Surf Flyer incl. Technical Data, Probes, Accessories and Important Definitions and Surface Parameters   Version 06/05 
 
© Mahr GmbH - Carl-Mahr-Str.1, D-37073 Göttingen, Germany - Tel. +49 711 9312-600 - eMail - Imprint -