The cost-effective testing device for semi- or fully automated testing of dial indicators, dial comparators, lever-type test indicators, 2-point inside measuring devices, and inductive and incremental probes.
Designed as a table-top unit, the OPTIMAR 100 is user-friendly and ensures fast test runs. It features a motorized drive and is equipped with a high-resolution measuring system. The test run is software-controlled.
Features
Used to test dial indicators, dial comparators, lever-type test indicators, 2-point inside measuring devices, digital dial indicators and inductive or incremental probes
Automation of sub-processes (automated pre-positioning) using motorized measuring-spindle drive
Fully automated measuring run for digital devices
OPTIMAR 100 may be used horizontally (e.g. for measuring 2-point inside measuring devices)
Testpiece mounting via vertical guide. Height can be adjusted quickly (adaptation of testpieces to different measuring ranges)
Box-shaped and thus rigid machine housing
For testpieces with a shaft diameter of 8 mm, 28 mm, 3/8' (optional)
Electronic hand wheel for manual control of the measuring anvil's movement. Self-adjusting sensitivity of the electronic hand wheel for adaptation to the specific action or measuring task
Ergonomic design of all operating elements
Compliance with the Abbe comparator principle for realizing highest measuring accuracy
High accuracy glass-scale measuring system with computerbased error compensation. Testing of 2-point inside measuring devices without loss of accuracy
Measuring uncertainty in vertical and horizontal direction: MPE(0.2 + L/100) μm, L in mm at T= 20 °C ± 0.5 °C, permissible temperature gradient 0.1 K/h
Mahr software, QMSOFT® software (partial version for indicators only)
Application
For analog dial indicators, dial comparators, lever-type test indicators, 2-point inside measuring devices, digital dial indicators, and inductive and incremental probes
close
