MarShaft SCOPE 600 plus 3D floor standing unit

Mahr is pleased to provide a new measurement method for the special camshaft application using the new MarShaft SCOPE 600 plus 3D: A combination of optical and touch sensors allow for a first ever functionally complete 3D Inspection of the workpiece. Due to this market need Mahr further developed our highly anticipated and received MarShaft SCOPE 750 plus system.  The advanced System now utilizes a new 2D Touch Probe, a motorized tailstock and a calibration for the linear axes. A matrix camera optically measures characteristics such as diameters, lengths, radii, geometries, location characteristics, cam angle or cam lift in seconds. The additional 2D Touch Probe detects features that are not optically measurable: concave cam shapes, axial run out on large shoulders, reference elements in the axial direction such as blind holes. For this system, the tactile and optical systems are aligned/adjusted to exist within one measuring coordinate system. This unit operates in conjunction with the MarWin software platform, thus providing full 3D functionality.


  •  Complete measuring of camshafts, including cam angle and all cam profiles
  •  Measurement of conturs
  •  No use of radial drivers
  •  Direct measurement of reference ( 2 flat,, blind borehole or keyway)
  •  Measurement of keyway grooves
  •  Measurement of blind boreholes
  •  100% 3D function with the new 2D probesystem 1320-2
  •  Additional Y- measuring axis
  •  Special calibration of the linear axis (Z-X-Y)
  •  MarShaft Professional Software
  •  Manual panel

  • Technical data
  • Applications
  • Options

Diameter error limit (X) (µm)
(1,0 + L/125) L in mm (at 20 °C ± 1 °C on reference standard)
Servo motors
Telecentric precision lens High-resolution CCD array
Length error limit (Z) (µm)
(2,0 + L/125) L in mm (at 20 °C ± 1 °C on reference standard)
Angle resolution (°)
0.01 to 0.0001
Measuring range diameter (X) (mm)
Workpiece weight (max.) in kg (text)
Length/diameter resolution (mm)
0.01 to 0.0001
Measuring range length (Z) (mm)

  • Complete measurement of camshafts

Typical workpieces

  • Camshaft
  • Eccentric shafts
  • Shafts with keyways or blind boreholes

  • Barcode-Scanner
  • Signal light (red, yellow, green)
  • Coated tip (no driver required)
  • Vibration isolation system
  • Temperature compensation
  • Thread Measurement
  • Turbocharger shaft measurement