Metrology
Metrology
Millimar P2004 F Inductive Probe
EN
  • Models with or without compressed-air (pneumatic) lifter or vacuum retraction
  • Measuring pin mounted in ball-bearing guide
  • High linearity over the entire measuring range
  • Excellent electromagnetic shielding (EMC)
  • All probes can be easily converted from axial to radial by mounting a slip on cap, included in the scope of supply
  • Chemical resistance data: resistant to oil, gasoline, water and aliphatics. Moderately resistant to acids, bases, solvents and ozone
  • Technical data

Order no.Measuring range fromMeasuring range up toDistance of lower stop MINDistance of lower stop MAXDistance of upper stop MINDistance of upper stop MAXLifter / retractionMeasuring force (N)Increase in measuring forceSensitivity deviationRepeatability fw (µm)Hysteresis fu (µm)Linearity deviation within +/- 0,5 mmLinearity deviation within +/- 1,0 mmLinearity deviation within +/- 2,0 mmIP protection categoryCable lengthWorking temperatureWorking temperature MINWorking temperature MAXOperating temperature MinOperating temperature MaxTemperature coefficientCompatibility
5323010
-2 mm
2 mm
-2.2 mm
0 mm
2.2 mm
4.4 mm
Standard model
0,75 N +/- 0,15 N
0,2 N/mm
0.3 %
0.1 µm
0.5 µm
0.4 µm
1.5 µm
3 µm
IP 64
2.5 m
20 °C
10 °C
55 °C
-10 °C
80 °C
0.15 µm/°C
Mahr-VLDT
5323011
-2 mm
2 mm
-2.2 mm
0 mm
2.2 mm
4.4 mm
Standard model
0,75 N +/- 0,15 N
0,2 N/mm
0.3 %
0.1 µm
0.5 µm
0.4 µm
1.5 µm
3 µm
IP 64
2.5 m
20 °C
10 °C
55 °C
-10 °C
80 °C
0.15 µm/°C
Tesa
5323013
-2 mm
2 mm
-2.2 mm
0 mm
2.2 mm
4.4 mm
Standard model
0,75 N +/- 0,15 N
0,2 N/mm
0.3 %
0.1 µm
0.5 µm
0.4 µm
1.5 µm
3 µm
IP 64
2.5 m
20 °C
10 °C
55 °C
-10 °C
80 °C
0.15 µm/°C
Marposs
5323014
-2 mm
2 mm
-2.2 mm
0 mm
2.2 mm
4.4 mm
Standard model
0,75 N +/- 0,15 N
0,2 N/mm
0.3 %
0.1 µm
0.5 µm
0.4 µm
1.5 µm
3 µm
IP 64
2.5 m
20 °C
10 °C
55 °C
-10 °C
80 °C
0.15 µm/°C
Federal