Metrology

Metrology
MarCator 23I Dial Indicator
EN
  • Unit construction and removable movement save repair/cleaning time and maintenance
  • Hardened gears and stainless steel racks provide lasting protection against indicator failure due to shock or wear
  • Jeweled bearings resist friction, add to longer indicator life
  • Skeletonized, hobbed gears for more sensitive response, superior indicator accuracy with minimal hysteresis error
  • Soft tinted dials (green - inch / yellow - metric) minimize eye strain
  • Special steel alloy, balanced dial hand affords no shift, precise reading
  • Controlled rack and pinion mesh eliminates slope for precise response and reading
  • Smooth adjusting bezels for easy setup
  • Positive pressure pull back spring requires less maintenance
  • Compliance with ANSI/AGD dimensional and accuracy specifications
  • These indicators are normally furnished with continuous dial (with R.C.) or + on right balance dial (w/o R.C.), lug back and .18” by .250" long contact
  • Optional Dials: balanced dial with + on left; continuous clockwise; continuous counterclockwise. (Order by part number and specify dial style desired)
  • For other dial styles or special requirements - call Mahr
  • Technical data

Order no.Product typeMeasuring span in mmGraduation value mmType of dial faceRange per rev. in mmStandardScale diameterDial color
2011810
P1/2I
0.25 mm
0.001 mm
0-5-0
0.1 mm
ANSI
57.15 mm
yellow
2011812
P1/2I-RC
0.25 mm
0.001 mm
0-10
0.1 mm
ANSI
57.15 mm
yellow
2011817
P1I-RC
0.5 mm
0.002 mm
0-20
0.2 mm
ANSI
57.15 mm
yellow
2014817
23IM-RC
1.25 mm
0.005 mm
0-50
0.5 mm
ANSI
57.15 mm
yellow
2014818
26IM-RC
2.5 mm
0.01 mm
0-100
1 mm
ANSI
57.15 mm
yellow
2014819
28IM-RC
5 mm
0.02 mm
0-200
2 mm
ANSI
57.15 mm
yellow
2015793
23I
1.25 mm
0.005 mm
0-25-0
0.5 mm
ANSI
57.15 mm
yellow
2015794
26I
2.5 mm
0.01 mm
0-50-0
1 mm
ANSI
57.15 mm
yellow
2015795
28IM
5 mm
0.02 mm
0-100-0
2 mm
ANSI
57.15 mm
yellow