Metrology
Metrology
MarForm MFU 110
EN
Reference form measuring machine for the precision measuring room and production with tactile and optical probe.
  • Use of the benefits of the most modern, optical metrology
  • Non-tacticle optical form measurement of sensitive parts
  • Particularly high measuring accuracy
  • Lowers your production costs
  • For use directly in production
  • Highest degree of automation
The high-precision MarForm MFU 110 measuring machine is based on the tried and tested MFU 100 with the addition of a high-speed C-axis. The highly flexible MarVision IPS 15 optical measuring system is optionally available. It is a tactile and optical probe for high-precision measuring tasks in measuring rooms or in production.

This measuring machine boasts all the advantages of conventional tactile and modern optical measuring technology.

Here is an overview of some of the advantages of the optical measuring technology:
  • No effects from measuring force, measuring objects are not bent or deformed
  • Contactless measuring, no scratching or damage to sensitive surfaces
  • Direct measurement, no effects of probe head geometry, therefore more accurate measurement of contours, e.g. edges, convex forms
  • Very small probe arm diameter, measurement of very small objects and forms, e.g. small holes
  • High rotational speed of C-axis, short measuring time, large volumes of data, areal measurement
  • Greater vertical and lateral resolution, higher precision e.g. for diameters and distances
  • Maximum measuring certainty process accuracy
  • Future-proof MarWin software package
  • Just like the MFU 100, there is an active air-conditioned enclosure available for the MFU 110 for use in the production area
  • Shorter distances and faster intervention for controlling the production process reduce your costs and optimize the quality of your products.
  • The motorized centering and leveling table, the key component of a form tester, together with the use of the T7W motorized probe, provide maximum automation.

    The MarForm MFU 110 is future-proof and expandable thanks to the rigorous separation of control and evaluation. New language versions are easy to incorporate, as are special evaluations and new standards.
  • Technical data
  • Applications
  • Options
  • Versions

Roundness deviation (µm+µm/mm measuring height) *
0,01 + 0,0002
Roundness deviation (µm+µm/mm measuring height) **
0,02 + 0,0004
Axial runout deviation (µm+µm/mm measuring radius) *
0,02 + 0,0002
Axial runout deviation (µm+µm/mm measuring radius) **
0,04 + 0,0004
Centering and tilting table
automatic
Table diameter (mm)
180
Table load capacity, centered (N)
200
Speed (rpm) 50 Hz / 60 Hz
0.1 to 200
Straightness deviation / 100 mm measuring path (µm)**, Z axis
0.1
Straightness deviation / total measuring path (µm)**, Z axis
0.3
Parallelism deviation Z-/C axis in tracing direction, measuring path (µm)
0.6
Measuring speed (mm/s), Z axis
0.1 to 50
Positioning speed (mm/s), Z axis
0.1 to 50
Straightness deviation / total measuring path (µm)**, X axis
0.3
Perpendicularity X/C axis, measuring path (µm)
0.3
Positioning speed (mm/s), X axis
0.1 to 50
Measuring speed (mm/s), X axis
0.01 to 50

Evaluation of roundness, radial runout, axial runout, concentricity, coaxiality, total ronout, cylindricity, straightness, parallelism, perpendicularity, pitch, flatness, conicity, line profile, position (DIN ISO 1101), taper form, diameter. Compact measuring volume, max load. 200 N Testing of 'true parallelism' by exceeding the workpiece center through the horizontal X-axis, result free from other measuring influences. Optimal for the increase of the tolerance range in production Fast roundness measurement with up to 200 rpm

  • MarForm IPS optical point sensor
  • Optional optical roughness measurement
  • combined optical and tactile probe arms
  • customized clamps for reproducibly clamping workpieces

MarForm MFU 110 FORM MEASURING MACHINE
  • High-precision MFU 110 form tester with optical sensor and high speed C-axis
  • MarWin evaluation computer
  • Additional hardware as per Mahr standard as at time of delivery
  • Windows-based operating system (Windows 7 Ultimate 64 bit)
  • Mahr form and position evaluation software package
  • Machine table base with integrated control unit
  • T7W length measuring probe as motorized bidirectional probe, including standard probe arm with sphere Ø 3 mm
  • with MarVision IPS 15 optical probe on request