Metrology

Metrology
Millimar 6001 Nozzle through-hole pin
EN
  • Calibrated ID tooling for the Dimensionair® Air Gaging Systems
  • Tooling is interchangeable without adjusting system magnification.
  • Federal Air Plugs have large clearance (see table below), allowing easy entrance into the hole being measured and a greater measuring range.
  • Long life - wide clearance and hard chrome (optional) body extends life of the Air Plug.
  • Deep, recessed jets - Air jets are recessed into the plug body, protecting them from damage.
  • Large jet size eliminates clogging from dirt and oils.
  • Order information: Please always state when ordering: Transmission ratio of the display unit (e.g. 2500:1), the nominal size to be measured and the specified workpiece tolerance
  • Technical data

Order no.Nominal size mmProduct typeNominal value ofNominal Diameter up toMagnificationMeasuring span (text)Compatibility
2105550
3.000 - 5.000
6001
3 mm
5 mm
2500:1 / 5000:1 / 10000:1
100µm / 50µm / 25µm
Mahr
2105551
5.000 - 8.000
6001
5 mm
8 mm
2500:1 / 5000:1 / 10000:1
100µm / 50µm / 25µm
Mahr
2105552
8.000 - 10.000
6001
8 mm
10 mm
2500:1 / 5000:1 / 10000:1
100µm / 50µm / 25µm
Mahr
2105553
10.000 - 15.000
6001
10 mm
15 mm
2500:1 / 5000:1 / 10000:1
100µm / 50µm / 25µm
Mahr
2105554
15.000 - 20.000
6001
15 mm
20 mm
2500:1 / 5000:1 / 10000:1
100µm / 50µm / 25µm
Mahr
2105555
20.000 - 40.000
6001
20 mm
40 mm
2500:1 / 5000:1 / 10000:1
100µm / 50µm / 25µm
Mahr
2105556
40.000 - 50.000
6001
40 mm
50 mm
2500:1 / 5000:1 / 10000:1
100µm / 50µm / 25µm
Mahr
2105557
50.000 - 65.000
6001
50 mm
65 mm
2500:1 / 5000:1 / 10000:1
100µm / 50µm / 25µm
Mahr
2105558
65.000 - 80.000
6001
65 mm
80 mm
2500:1 / 5000:1 / 10000:1
100µm / 50µm / 25µm
Mahr
2105559
80.000 - 100.000
6001
80 mm
100 mm
2500:1 / 5000:1 / 10000:1
100µm / 50µm / 25µm
Mahr
2105560
100.000 - 110.000
6001
100 mm
110 mm
2500:1 / 5000:1 / 10000:1
100µm / 50µm / 25µm
Mahr
2105561
110.000 - 120.000
6001
110 mm
120 mm
2500:1 / 5000:1 / 10000:1
100µm / 50µm / 25µm
Mahr
2105562
120.000 - 130.000
6001
120 mm
130 mm
2500:1 / 5000:1 / 10000:1
100µm / 50µm / 25µm
Mahr
2105563
130.000 - 140.000
6001
130 mm
140 mm
2500:1 / 5000:1 / 10000:1
100µm / 50µm / 25µm
Mahr
2105564
140.000 - 150.000
6001
140 mm
150 mm
2500:1 / 5000:1 / 10000:1
100µm / 50µm / 25µm
Mahr