Metrology
Metrology
Multimar 36B-20-VT Indicator gage
EN
  • Friction-free, zero-backlash measuring anvil holder for high measuring accuracy 
  • Parallel spring-loaded system for repeatable measuring force
  • User-friendly and ergonomic:
    - Table surface can be tilted and clamped between 0° and 90°
    - Adjustable lifting of movable probe
  • Adjustable measuring force
  • Technical data
  • Applications

Order no.Mounting holeMinimum measuring forceMaximum measuring forceApplication range outsideApplication range insideResolutionResolution
2061657
8 mm
0 N
35 N
6 - 127
19 - 89
0.001 mm / 0.001 mm / 0.002 mm / 0.005 mm / 0.01 mm
0 inch / 0 inch / 0 inch / 0 inch / 0.001 inch
2061658
8 mm
0 N
35 N
6 - 222
19 - 197
0.001 mm / 0.001 mm / 0.002 mm / 0.005 mm / 0.01 mm
0 inch / 0 inch / 0 inch / 0 inch / 0.001 inch

  • For measuring internal and external diameters, centering edges, narrow shoulders and recesses
  • “T”-plates give a diameter reading directly across the diameter. A third contact may be used as a side-stop or centralizer
  • “V”-plates are self-centralizing. Three jaws are used and the measurement is of the distance between the sensitive contact and the chord formed by the two reference contacts. This measurement bears a direct relationship to the diameter and compensation is made by a special ratio indicator so diameter is read directly. Used to inspect parts with odd number lobing conditions

Metrology
Multimar 36B-10-VT Indicator gage
EN
  • Friction-free, zero-backlash measuring anvil holder for high measuring accuracy 
  • Parallel spring-loaded system for repeatable measuring force
  • User-friendly and ergonomic:
    - Table surface can be tilted and clamped between 0° and 90°
    - Adjustable lifting of movable probe
  • Adjustable measuring force
  • Technical data
  • Applications

Order no.Mounting holeMinimum measuring forceMaximum measuring forceApplication range outsideApplication range insideResolutionResolution
2061657
8 mm
0 N
35 N
6 - 127
19 - 89
0.0005 mm / 0.001 mm / 0.002 mm / 0.005 mm / 0.01 mm
0.00002 inch / 0.00005 inch / 0.0001 inch / 0.0002 inch / 0.0005 inch

  • For measuring internal and external diameters, centering edges, narrow shoulders and recesses
  • “T”-plates give a diameter reading directly across the diameter. A third contact may be used as a side-stop or centralizer
  • “V”-plates are self-centralizing. Three jaws are used and the measurement is of the distance between the sensitive contact and the chord formed by the two reference contacts. This measurement bears a direct relationship to the diameter and compensation is made by a special ratio indicator so diameter is read directly. Used to inspect parts with odd number lobing conditions