Metrology
Metrology
MarShaft SCOPE 600 plus 3D floor standing unit
EN

Mahr, the application specialist, provides a completely new measurement method for the camshaft and now (optionally) also for straight and helical cylindrical gears using the new MarShaft SCOPE 600 plus 3D: The combination of optical and tactile sensors allow for the first time ever the functionally complete 3D inspection of the workpiece in one clamping. Due to this market need, Mahr further developed the highly anticipated and well-received MarShaft SCOPE 750 plus system.  The advanced system now utilizes a new 2D probe system, a motorized tailstock and a calibration for the linear axes. A matrix camera optically measures characteristics such as diameters, lengths, radii, geometries, location characteristics, cam angle or cam lift in seconds. The additional 2D probe system detects features that are not optically measurable: concave cam profile, all common gear parameters on cylindrical gears, axial run out, reference elements in the axial direction such as blind holes. For this system, the tactile and optical systems are calibrated in one measuring coordinate system. The measuring station operates in conjunction with the MarWin software platform, thus providing full 3D functionality.

Features:

  •  Complete measuring of camshafts, including cam angle and all cam profiles
  •  Measurement of cylindrical gears
  •  Measurement of conturs
  •  No use of radial drivers
  •  Direct measurement of reference ( 2 flat,, blind borehole or keyway)
  •  Measurement of keyway grooves
  •  Measurement of blind boreholes
  •  100% 3D function with the new 2D probesystem 1320-2
  •  Additional Y- measuring axis
  •  Special calibration of the linear axis (Z-X-Y)
  •  MarShaft Professional Software
  •  Manual panel

  • Technical data
  • Applications
  • Options

Diameter error limit (X) (µm)
(1,0 + L/125) L in mm (at 20 °C ± 1 °C on reference standard)
Drive
Servo motors
Lens
Telecentric precision lens High-resolution CCD array
Length error limit (Z) (µm)
(2,0 + L/125) L in mm (at 20 °C ± 1 °C on reference standard)
Angle resolution (°)
0.01 to 0.0001
Measuring range diameter (X) (mm)
120
Workpiece weight (max.) in kg (text)
15
Length/diameter resolution (mm)
0.01 to 0.0001
Measuring range length (Z) (mm)
600

  • Complete measurement of camshafts

Typical workpieces

  • Camshaft
  • Eccentric shafts
  • Shafts with keyways or blind boreholes

  • Barcode-Scanner
  • Signal light (red, yellow, green)
  • Coated tip (no driver required)
  • Vibration isolation system
  • Temperature compensation
  • Thread Measurement
  • Turbocharger shaft measurement