Metrology
Metrology
Precimar Precimar ICM 100 Dial indicator test device
EN
The Precimar ICM 100 is the most cost effective test station for the partially or fully automated testing of dial indicators, dial comparators, dial test indicator measuring devices and 2 point bore gages, as well as inductive and incremental measuring probes.
  • Automated sub-processes with motorized measuring spindle drive
  • Fully automatic measuring procedure with digital measuring equipment
  • Precimar ICM 100 is suitable for horizontal use
  • Testpiece held by a vertical guide. Fast height adjustment to adapt measuring objects to different measuring ranges
  • Rigid, box-shaped device housing
  • For measuring objects with 8 mm, 28 mm, 3/8'' shaft diameter
  • Electronic handwheel for manual control of spindle movement. The sensitivity of the electronic handwheel adjusts automatically to the testpiece resolution
  • All control elements are ergonomically arranged
  • Complies with Ernst Abbe's comparator principle for maximum measuring accuracies
  • LIF 101 measuring system with error compensation
  • Checking of 2-point bore gages with no loss of accuracy
  • Pre-positioning: automatic
  • Fine positioning: electronic rotary knob
  • Technical data
  • Applications
  • Accessories
  • Shipment

Device dimensions
235 x 216 x 480
Digital numerical increment [µm]
0,02
Direct measuring range [mm]
100
Measuring uncertainty MPEE1 (L in mm) [µm]
≤ (0,2 + L/250)

For testing of:

  • Dial indicators (analog and digital)
  • Dial comparators (analog and digital)
  • Dial test indicator measuring devices (analog and digital)
  • Inductive and incremental probes
  • 2 point bore gages

  • Holder for dial test indicator measuring devices
  • Wide choice of adapters for digital dial indicators and incremental measuring probes from various manufacturers
  • Please ask for the appropriate adapter
  • Inductive probes from various manufacturers can be connected to Precimar ICM 100 via the probe interface.
  • Holding device and software for testing 2-point bore gages with a moving measuring pin (test in accordance with VDI / VDE / DGQ 2618, Part 13.2, 2005)
  • Device for force sensor on request
  • Camera attachment kit for precise and ergonomically improved operation in semi-automatic measuring procedures
  • Calibration set for user calibration
  • Factory or DAkkS/DKD calibrations available

  • ICM 100 basic unit
  • Cable for connection via USB or RS232
  • 9-to-25-pin adapter
  • AC adapter 100-240 V
  • Reduction clamping bushing, 28 to 8 mm
  • Mahr calibration certificate