Metrology

Metrology
Precimar OPTIMAR 100 Dial indicator test device
EN
The OPTIMAR 100 is the most cost-effective test station for the partially or fully automated testing of dial indicators, dial comparators, dial test indicator measuring devices and 2-point bore gages as well as inductive and incremental measuring probes.
  • Automated sub-processes with motorized measuring spindle drive
  • Fully automatic measuring procedure with digital measuring equipment
  • OPTIMAR 100 suitable for horizontal use
  • Testpiece held by a vertical guide. Fast height adjustment to adapt measuring objects to different measuring ranges
  • Rigid, box-shaped device housing
  • For measuring objects with 8 mm, 28 mm, 3/8'' shaft diameter
  • Electronic handwheel for manual control of spindle movement. The sensitivity of the electronic handwheel adjusts automatically to the testpiece resolution
  • All control elements are ergonomically arranged
  • Complies with Ernst Abbe's comparator principle for maximum measuring accuracies
  • LIF 101 measuring system with computer-aided deviation correction
  • Checking of 2-point bore gages with no loss of accuracy
  • Pre-positioning: automatic
  • Fine positioning: electronic rotary knob
  • Technical data
  • Applications
  • Accessories
  • Shipment

device dimensions
235 x 216 x 480
Digital numerical increment [µm]
0,02
Direct measuring range [mm]
100
Measuring uncertainty MPEE1 (L in mm) [µm]
≤ (0,2 + L/250)

For testing of:

  • Dial indicators (analog and digital)
  • Dial comparators (analog and digital)
  • Dial test indicator measuring devices (analog and digital)
  • Inductive and incremental probes
  • 2-point bore gages

  • Holder for dial test indicator measuring devices
  • Wide choice of adapters for digital dial indicators and incremental measuring probes from various manufacturers
  • Please ask for the specific adapter
  • Inductive probes from various manufacturers can be connected to OPTIMAR via the probe box
  • Holding device and software for testing 2-point bore gages with a moving measuring pin (test in accordance with VDI / VDE / DGQ 2618, Part 13.2, 2005)
  • Device for force sensor on request
  • Camera attachment kit for precise and ergonomically better work during the semi-automatic measuring sequences
  • Calibration set for user calibration
  • A factory calibration or DAkkS/DKD calibration is available for the measuring station.

  • Basic unit 100
  • Cable connection USB resp. RS232
  • Adapter 9 to 25-pin
  • Mains adapter 100-240 V
  • Adapter busing 28 to 8 mm
  • Mahr Calibration certificate