Metrología
Metrología
MarCator Q6I-RC Comparador de cuadrante mecánico
ES
  • Unit construction and removable movement save repair/cleaning time and maintenance
  • Hardened gears and stainless steel racks provide lasting protection against indicator failure due to shock or wear
  • Jeweled bearings resist friction, add to longer indicator life
  • Skeletonized, hobbed gears for more sensitive response, superior indicator accuracy with minimal hysteresis error
  • Soft tinted dials (green - inch / yellow - metric) minimize eye strain
  • Special steel alloy
  • Balanced dial hand affords no shift, precise reading
  • Controlled rack and pinion mesh eliminates slope for precise response and reading
  • Smooth adjusting bezels for easy setup
  • Positive pressure pull back spring requires less maintenance
  • Compliance with ANSI/AGD dimensional and accuracy specifications
  • These indicators are normally furnished with continuous dial (with R.C.) or + on right balance dial (w/o R.C.), lug back and .18” by .250" long contact
  • Optional Dials: balanced dial with + on left; continuous clockwise; continuous counterclockwise. (Order by part number and specify dial style desired)
  • For other dial styles or special requirements - call Mahr
  • Datos técnicos

Núm. de referenciaTipo de productoRango de medición en mmSubdivisión de la escala mmModelo de esferaVuelta de la aguja en mmNormaDiámetro de la escalaColor de la esfera
2011867
Q1I
0,5 mm
0,002 mm
0-10-0
0,2 mm
ANSI
70 mm
amarillo
2011868
Q1I-RC
0,5 mm
0,002 mm
0-20
0,2 mm
ANSI
70 mm
amarillo
2011871
Q3I
1,25 mm
0,005 mm
0-25-0
0,5 mm
ANSI
70 mm
amarillo
2011872
Q3I-RC
1,25 mm
0,005 mm
0-50
0,5 mm
ANSI
70 mm
amarillo
2011875
Q6I
2,5 mm
0,01 mm
0-50-0
1 mm
ANSI
70 mm
amarillo
2011876
Q6I-RC
2,5 mm
0,01 mm
0-100
1 mm
ANSI
70 mm
amarillo
2011879
Q8I
5 mm
0,02 mm
0-100-0
2 mm
ANSI
70 mm
amarillo
2011880
Q8I-RC
5 mm
0,02 mm
0-200
2 mm
ANSI
70 mm
amarillo