計測技術
計測技術
MarShaft SCOPE plus 600 plus 3D floor standing unit
JA

Mahr, the application specialist, provides a completely new measurement method for the camshaft and now (optionally) also for straight and helical cylindrical gears using the new MarShaft SCOPE 600 plus 3D: The combination of optical and tactile sensors allow for the first time ever the functionally complete 3D inspection of the workpiece in one clamping. Due to this market need, Mahr further developed the highly anticipated and well-received MarShaft SCOPE 750 plus system.  The advanced system now utilizes a new 2D probe system, a motorized tailstock and a calibration for the linear axes. A matrix camera optically measures characteristics such as diameters, lengths, radii, geometries, location characteristics, cam angle or cam lift in seconds. The additional 2D probe system detects features that are not optically measurable: concave cam profile, all common gear parameters on cylindrical gears, axial run out, reference elements in the axial direction such as blind holes. For this system, the tactile and optical systems are calibrated in one measuring coordinate system. The measuring station operates in conjunction with the MarWin software platform, thus providing full 3D functionality.

Features:

  •  Complete measuring of camshafts, including cam angle and all cam profiles
  •  Measurement of cylindrical gears
  •  Measurement of conturs
  •  No use of radial drivers
  •  Direct measurement of reference ( 2 flat,, blind borehole or keyway)
  •  Measurement of keyway grooves
  •  Measurement of blind boreholes
  •  100% 3D function with the new 2D probesystem 1320-2
  •  Additional Y- measuring axis
  •  Special calibration of the linear axis (Z-X-Y)
  •  MarShaft Professional Software
  •  Manual panel

  • 技術データ
  • 用途
  • オプション

直径誤差限界(X) (µm)
(1.0 + L/125) L in mm (at 20°C ± 1°C on reference standard)
ドライブ
Servo motors
レンズ
Telecentric precision lens High-resolution CCD array
長さ誤差限界 (Z) (µm)
(2 + L/125) L in mm (at 20°C ± 1°C on reference standard)
角度分解能(°)
0.01 to 0.0001
測定範囲の直径 (X) (mm)
120
測定物の重量 (最大) kg (テキスト)
15
長さ/直径分解能 (mm)
0.01 to 0.0001
測定範囲長さ (Z) (mm)
600

  • Complete measurement of camshafts
  • Complete measurement of gear shafts

Typical workpieces

  • Camshaft
  • Gear shafts
  • Eccentric shafts
  • Shafts with keyways or blind boreholes

  • Barcode-Scanner
  • Signal light (red, yellow, green)
  • Coated tip (no driver required)
  • Vibration isolation system
  • Temperature compensation
  • Thread Measurement
  • Turbocharger shaft measurement