Messtechnik
Messtechnik
MarSurf Pocket Surf IV Aparelhos móveis de medição de rugosidade
PT
  • Durable cast aluminum housing to provide years of accurate and reliable measuring operations
  • Can be used to measure four selectable parameters: Ra, Rmax/Ry, Rz
  • Review all of the parameters after the measurement is complete
  • Adjustable measuring length based on 1, 3 or 5 times the cutoff wavelength of 0.8 mm/0.030"
  • Operates in any position – horizontal, vertical, and upside down
  • Four switchable probe positions – axial or at an angle of 90°, 180° or 270°
  • Even difficult to reach surfaces such as inside and outside diameters are accessible
  • MarConnect data output for easy data transfer that is compatible with standard data processing systems
  • Easy to read LCD presents the measured roughness value in μm or μinch immediately after scanning
  • Out of range (high or low) and 'low battery' signals are also displayed
  • Simplified calibration process
  • Improved battery life with 9V battery that is easy to replace
  • Dados técnicos
  • Aplicações

 
2191800 - POCKET SURF 4 WITH CERTIFIED REFERENCE SPECIMEN & EGH-1019
2191802 - POCKET SURF 4 WITH CERTIFIED REFERENCE SPECIMEN & EGH-1026
Princípio de medição
Procedimento de corte de prova
Procedimento de corte de prova
Apalpador
Apalpador de patim piezelétrico
Apalpador de patim piezelétrico
Unidade de medição
métrico/pol.
métrico/pol.
Campo de medição mm
Ra - 6,35 µm / 250 Ry, Rmax, Rz - 25,3 µm / 999 µpol
Ra - 6,35 µm / 250 Ry, Rmax, Rz - 25,3 µm / 999 µpol
Resolução de perfil
0,01 µm / 1 µpol
0,01 µm / 1 µpol
Quantidade n de cursos de medição individuais conforme ISO/JIS
selecionável: 1 a 5
selecionável: 1 a 5
Ponta de apalpe
10 µm /.0004"
5 µm / .0002"
Força de medição
15 mN
15 mN
Bateria
Bateria, 9V
Bateria, 9V
Dimensões em mm
140 x 76 x 6,35 mm
140 x 76 x 6,35 mm

  • Pocket-sized, economically priced, completely portable instrument
  • Performs traceable surface roughness measurements on a wide variety of surfaces
  • Can be used confidently in production, on the shop floor and in the laboratory